Product introduction

Vacuum system of our company can solve adiabatic compression problem which causes serious defective products during die casting.
Our vacuum system includes vacuum valve, chill vent and vacuum device. Vacuum system can applicate to aluminum, magnesium and zinc cold chamber or hot chamber also.

Vacuum device

DIEVS series vacuum device can help vacuum valve and chill vent acting excellently.
DIEVS-CVC2 series vacuum device is installed with one  vacuum valve or  two chill vents.

We entrust our customer to output linkage signal of vacuum device and die casting machine.
Please refer to document on the right and discuss it with die casting maker together.  I/O signal are general specification

Usage environment of vacuum device

Please write down details of vacuum device usage environment as much as possible. It can help us to prepare bundled item for our customers.

Please refer to the document on the right side. Vacuum device usage environment survey

DIEVS80-CVC2

Model DIEVS80-CVC2
Drive voltage AC100V~AC220V single phase
Control voltage DC24V
Common vacuum degree -75 kPa
Vacuum generation Vacuum ejector
Air Above 0.45MPa 150L/min
Applicable DC machine ~500 t
Weight About 109 kg
Dimension W485×D573×H1574
Tank volume 80L

DIEVS120-CVC2

Model DIEVS120-CVC2
Drive voltage AC200V three phase
Control voltage DC24V
Common vacuum degree -90 kPa
Vacuum generation Vacuum pump(BUSCH)
Air Above 0.4 MPa
Applicable DC machine ~1250 t
Weight About 202 kg
Dimension W640×D913×H1602
Tank volume 120L